Linksys SFE2000P - Managed Ethernet Switch Reference Manual page 146

Chapter
7
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
The ARP Page contains the following fields.
• ARP Entry Age Out — Defines the amount of time (seconds) that pass between ARP requests
about an ARP table entry. After this period, the entry is deleted from the table. The range is 1 -
40000000, where zero indicates that entries are never cleared from the cache. The default value is
60,000 seconds.
• Clear ARP Table Entries— Indicates the type of ARP entries that are cleared on all devices. The
possible values are:
– None — ARP entries are not cleared.
– All — All ARP entries are cleared.
– Dynamic — Only dynamic ARP entries are cleared.
– Static — Only static ARP entries are cleared.
• Interface — Indicates the interface connected to the device.
• IP Address — Indicates the station IP address, which is associated with the MAC address filled in
below.
• MAC Address — Indicates the station MAC address, which is associated in the ARP table with the
IP address.
• Status — Indicates the ARP Table entry status. Possible field values are:
– Dynamic — Indicates the ARP entry was learned dynamically.
138
ARP Page
Chapter 7: