Linksys SFE2000P - Managed Ethernet Switch Reference Manual page 254

Chapter
16
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
The Etherlike Page contains interface statistics. The Etherlike Page contains the following fields:
• Interface — Indicates the device for which statistics are displayed. The possible field values are:
– Port — Defines the specific port for which Etherlike statistics are displayed.
– LAG — Defines the specific LAG for which Etherlike statistics are displayed.
• Refresh Rate — Defines the amount of time that passes before the interface statistics are refreshed.
The possible field values are:
– 15 Sec — Indicates that the Etherlike statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the Etherlike statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the Etherlike statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the Etherlike statistics are not refreshed.
• Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received on the
selected interface.
• Single Collision Frames — Displays the number of single collision frames received on the selected
interface.
• Late Collisions — Displays the number of late collision frames received on the selected interface.
246
Etherlike Page
Chapter 16: