Chapter
6
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
•
Interface — Displays the interface on which GVRP is enabled.
•
GVRP State — Indicates if GVRP is enabled on the interface. The possible field values are:
–
Enabled — Enables GVRP on the selected interface.
–
Disabled — Disables GVRP on the selected interface.
•
Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is enabled on the interface. The
possible field values are:
–
Enable — Enables Dynamic VLAN creation on the interface.
–
Disable — Disables Dynamic VLAN creation on the interface.
•
GVRP Registration — Indicates if VLAN registration through GVRP is enabled on the device. The
possible field values are:
–
Enable — Enables GVRP registration on the device.
–
Disable — Disables GVRP registration on the device.
2. Define the relevant fields.
3. Click Apply. The GVRP Settings are defined, and the device is updated.
Modifying GVRP Settings
1. Click Bridging > VLAN Management > GVRP Settings. The GVRP Settings Page opens:
2. Click the Edit button. The Edit GVRP Page opens:
The Edit GVRP Page contains the following fields:
•
Interface — Displays the interface on which GVRP is enabled. The possible field values are:
–
Port — Indicates the port number on which GVRP is enabled.
–
LAG — Indicates the LAG number on which GVRP is enabled.
•
GVRP State — Indicates if GVRP is enabled on the interface. The possible field values are:
112
Edit GVRP Page
Chapter 6: