Linksys SFE2000P - Managed Ethernet Switch Reference Manual page 109

The LACP Parameter Settings Page contains the following fields:
• Port — Defines the port number to which timeout and priority values are assigned.
• LACP Port Priority — Defines the LACP priority value for the port. The field range is 1-65535.
• LACP Timeout — Administrative LACP timeout. The possible field values are:
– Short — Defines a short timeout value.
– Long — Defines a long timeout value. This is the default value.
3. Define the relevant fields.
4. Click Apply. The LACP Parameters settings are defined, and the device is updated.
Chapter 5:
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
LACP Parameter Settings Page
Chapter
5
101