Linksys SFE2000P - Managed Ethernet Switch Reference Manual page 220

Chapter
12
SFE2000/SFE2000P Gigabit Ethernet Switch Reference Guide
• Aggregate Policer Name— Specifies the Aggregate Policer Name
• Ingress Committed Information Rate (CIR) — Defines the CIR in bits per second. This field is
only relevant when the Police value is Single.
• Ingress Committed Burst Size (CBS) — Defines the CBS in bytes per second. This field is only
relevant when the Police value is Single.
• Exceed Action — Action assigned to incoming packets exceeding the CIR. This field is only
relevant when the Police value is Single. Possible values are:
– Drop — Drops packets exceeding the defined CIR value.
– Remark DSCP —Remarks packet's DSCP values exceeding the defined CIR value.
– None —Forwards packets exceeding the defined CIR value.
2. Click the Add button. The Add QoS Aggregate Policer Page opens:
The Add QoS Aggregate Policer Page contains the following fields.
• Aggregate Policer Name— Specifies the Aggregate Policer Name
• Ingress Committed Information Rate (CIR) — Defines the CIR in bits per second. This field is
only relevant when the Police value is Single.
• Ingress Committed Burst Size (CBS) — Defines the CBS in bytes per second. This field is only
relevant when the Police value is Single.
• Exceed Action — Action assigned to incoming packets exceeding the CIR. This field is only
relevant when the Police value is Single. Possible values are:
– Drop — Drops packets exceeding the defined CIR value.
– Remark DSCP —Remarks packet's DSCP values exceeding the defined CIR value.
– None —Forwards packets exceeding the defined CIR value.
3. Define the relevant fields.
4. Click Apply. The Aggregate policer is added, and the device is updated.
212
Add QoS Aggregate Policer Page
Chapter 12: