Transmitter Installation Procedures; Flowmeter Documentation - Emerson MICRO MOTION 2700 Installation Manual

Before You Begin
1.5

Transmitter installation procedures

To install the transmitter, the following procedures are required:
• Install the transmitter – see Chapter 2
• Wire the transmitter to the sensor – see Chapter 3
• Wire the transmitter outputs:
- For Model 1700 or 2700 analog outputs transmitters, see Chapter 4.
- For Model 1700 or 2700 intrinsically safe analog outputs transmitters, see Chapter 5.
- For Model 2700 configurable I/O transmitters, see Chapter 6.
- For Model 2700 F
Chapter 7.
1.6

Flowmeter documentation

Table 1-1 lists documentation sources for other required information. Documents can be obtained in
PDF form from the Micro Motion web site (www.micromotion.com/documentation).
Table 1-1 Flowmeter documentation resources
Topic
Sensor installation
Core processor installation (if mounted
remotely from sensor and transmitter)
Transmitter configuration, transmitter
startup and use, and transmitter
troubleshooting
Installation Manual
fieldbus and PROFIBUS-PA outputs transmitters, see
OUNDATION
Document
Installation manual shipped with sensor
This document
Series 1000 and 2000 Transmitter Configuration and
Use Manual
or
Model 2700 Transmitter with F
Installation and Operation Manual
or
Model 2700 Transmitter with PROFIBUS-PA
Installation and Operation Manual
Fieldbus
OUNDATION
3