Smart Technologies SMART Board Installation Manual page 21

16. Place the overlay facedown on a flat surface.
IMPORTANT
17. Attach a washer and an adjustment handle to the overlay's two mounting plates, leaving
approximately 1/4" (0.6 cm) of space between the washer and the mounting plate.
Washer
99-00667-00 B0
In the next step, you'll attach two adjustment handles to the overlay. However,
take a moment to familiarize yourself with how to tighten and loosen these
handles before you attach them.
Adjustment
Handle
Mounting Plate
Installing the Interactive Whiteboard 13