Installing Smart Software - Smart Technologies SMART Board 600i3 Configuration And User's Manual

22 | CH A P T E R 3 – C O N N E C T I N G Y O U R S M A R T BOAR D 60 0I 3 OR S BD6 00 I3
I N T E R A C T I V E W H I T E B O A RD S Y S T E M

Installing SMART Software

When you connect a computer with SMART product drivers and SMART Notebook
software to your system, you can control your computer from your interactive
whiteboard's screen, write in digital ink over your projected desktop or directly into any
Ink Aware application, and then save your notes to a SMART Notebook file. You can
also connect the video output of a hardware device, such as a VCR or DVD player, to
your interactive whiteboard system's ECP to display the video signal on your system.
Refer to the included installation document to initially set up and connect your
SMART Board 600i3 or SBD600i3 interactive whiteboard system.
Your SMART Board 600 or SBD600 series interactive whiteboard product box
includes software CDs for Mac OS or Windows® operating systems. You must install
this software before you can use your interactive whiteboard system's features.
If the included software CDs are for an older version of the software, you will need to
download a newer version. SMART Notebook software upgrades and online Help are
available at www.smarttech.com/support/software/index.asp. This page also lists the
minimum hardware requirements for each software version. If SMART product drivers
and SMART Notebook software (or SMART Board software) are already installed on
your computer, take this opportunity to upgrade your software to ensure compatibility.