Product Hardware Features - TRENDnet TEW-718BRM User Manual

N150 wireless adsl 2/2+ modem router
Hide thumbs Also See for TEW-718BRM:
Table of Contents

Advertisement

TRENDnet User's Guide
Smart Quality of Service (QoS) controls to allocate bandwidth to: Gaming, Chat,
VoIP, P2P, Video, and Web Access
Advance Firewall protection with Network Address Translation (NAT), Stateful
Packet Inspection (SPI), and WAN stealth mode
Supports Internet Group Multicast Protocol IGMPv1/2/3 proxy and snooping
for multicast applications
Access Control: Virtual Servers, MAC / IP Packet Filters, URL / Keyword Filters,
Demilitarized Zone (DMZ) host, PPTP / L2TP / IPsec VPN pass through
Supports static and dynamic RIP v1/2 routing
Dynamic DNS support
Universal Plug and Play (UPnP) for auto discovery and support for device
configuration of Internet applications
Local / remote management via Web browser, upgrade firmware, and backup /
restore configuration
Supports TR069 remote management (CPE and ACS support)
Device monitoring using modem and router logs, email alerts, and SNMP v1/2c
support
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
© Copyright 2013 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
2dBi Detachable Antenna
Power
Port
Power Port – Connect the included power adapter from your modem router
power port and to an available power outlet.
Note: Use only the adapter that came with your router.
LAN Ports – Connect Network cables (also called network cables) from your
modem router LAN ports to your wired network devices.
ADSL WAN Port (RJ-11 telephone port) –Connect an RJ-11 telephone cable
from your modem router ADSL WAN port to your telephone jack/DSL line.
Antenna – The antenna broadcast wireless network signals.
TEW-718BRM
ADSL
LAN
Ports
WAN Port
2

Advertisement

Table of Contents
loading

Table of Contents