Table of Contents
Advertisement
TRENDnet User's Guide
Product Hardware Features
Rear View
© Copyright 2020 TRENDnet. All Rights Reserved.
No
Item
Description
1
Power Port
Connect the included power adapter from your router
power port and to an available power outlet.
2
10/100 LAN Ports 1-3
Connect Ethernet cables (also called network cables)
from your router LAN ports to your wired network
devices.
3
Gigabit WAN/Internet
Connect an Ethernet cable from your router Internet
Port
port to your modem.
4
Reset/WPS Button (Wi-
Push and hold this button for 3 seconds and release to
Fi Protected Setup)
activate WPS. The Power LED on front panel will blink
when WPS is activated.
Push and hold for 5 seconds or longer to reset to
factory defaults. All LEDs will flash.
TEW-831DR
3
Advertisement
Table of Contents
