Table of Contents
Advertisement
TRENDnet User's Guide
Universal Repeater
Setup > Wireless Settings
Universal Repeater mode allows the modem router to function as a wireless extender or
repeat the signal of another wireless access point or router in order to extend or
broaden the signal coverage. The diagram displays the modem router in universal
repeater mode repeating/extending the signal of an existing wireless router in order for
laptop computers to establish better wireless connectivity in an area with weak signal
coverage. When enabling this mode, the modem router's DHCP server will be disabled
automatically.
1. Log into your router management page (see "Access your router management page"
on
page
35).
2. Click on Setup, and click on Wireless Settings.
3. Click the Wireless Operation Mode drop-down list and select Universal Repeater.
4. Click the Scan button at the bottom of the page.
© Copyright 2013 TRENDnet. All Rights Reserved.
5. A list of available wireless networks will appear at the bottom of the page. Click Select
next to the wireless network you would like to repeat. The selected entry will populate
the fields at the top of the page. Enter the wireless network encryption key if necessary.
6. To save changes, click Apply.
Note: If you would like to discard the changes, click Undo before you click Apply.
7. If prompted to reboot in order to apply changes, click Reboot at the bottom of the
page and click OK or Continue to reboot the device.
TEW-718BRM
29
Advertisement
Table of Contents
