Setup Ipv6 On Your Router - TRENDnet TEW-718BRM User Manual

TRENDnet User's Guide

Setup IPv6 on your router

Setup > IPv6
IPv6 (Internet Protocol Version 6) was developed to be the successor protocol to well
known and widely used protocol IPv4 (Internet Protocol Version 4) for network
addressing. The new addressing protocol is designed to minimize processing overhead
by routers, significantly increase the available IP address space, provide integrated
security, and open the possibility of more extensions and options. ISP have already
transition their networks to accommodate IPv6 and are starting to offer IPv6 services.
Note: The router offers native IPv6 as well as IPv4 to IPv6 transitional connection types.
1. Log into your router management page (see "Access your router management page"
on page 35).
2. Click on Setup, and click on IPv6.
3. Next to IPv6, select the Enable option to enable IPv6.
WAN IPv6 Address Settings
4. Click the Connection Type drop-down list to select the connection provided by your
ISP (Internet Service Provider).
5. Complete the fields required by your ISP and the optional settings only if required.
6. Click Apply at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Apply.
Note: If you are unsure which Internet connection type you are using, please contact
your ISP (Internet Service Provider).
© Copyright 2013 TRENDnet. All Rights Reserved.
7. If prompted to reboot in order to apply changes, click OK or Continue to reboot the
device.
Note: When configuring PPPoE, the IPv6 Dual Stack option is available under Setup >
Internet Setup in the PPPoE connection settings.
LAN IPv6 Address Settings
8. Enter your LAN IPv6 address.
•
LAN IPv6 Address – Enter the router LAN IPv6 address.
9. Configure your IPv6 Autoconfiguration (LAN IPv6 DHCP server) settings.
10. Click Apply at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Apply.
TEW-718BRM
52