Product Hardware Features - TRENDnet TEW-818DRU User Manual

TRENDnet User's Guide
Gigabit Ports
Gigabit ports extend high performance wired connections
Wireless Coverage
Whole home wireless coverage for average size homes
Backward Compatible
Compatible with legacy wireless devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to 50%
Targeted Beamforming
Increased real-time performance by directing stronger wireless to your specific
location
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions. 802.11n 2.4 GHz
TurboQAM speeds requires clients with TurboQAM support.
** Printer Control Center utility installation required for each computer in order to
access the printer
© Copyright 2014 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
USB 3.0 Share
Port
WPS Button
Gigabit LAN
Ports 1-4
On/Off Power Switch
(EU only)
• USB 3.0 and USB 2.0 Share Port: Connect a USB storage device to share files across
your network or connect a USB printer to share printers across your network
(Printer Control Center utility required for printer sharing).
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
• Gigabit LAN Ports 1-4: Connect Ethernet cables (also called network cables) from
your router LAN ports to your wired network devices.
• Gigabit Internet Port: Connect an Ethernet cable from your router Internet port to
your modem.
TEW-818DRU
USB 2.0 Share
Port
Gigabit Internet
Port
Power Port
Reset Button (Located on Bottom)
5