Prioritize Traffic Using Qos (Quality Of Service) - TRENDnet TEW-718BRM User Manual

TRENDnet User's Guide

Prioritize traffic using QoS (Quality of Service)

Configuration > Advanced Setting > Quality of Service
You may want to prioritize outbound traffic for specific computers or devices on your
network to have higher priority.
1. Log into your router management page (see "Access your router management page"
on page 35).
2. Click on Advanced, and click on Quality of Service.
3. Click the QoS drop-down list and select the Enable option.
4. The WAN Interface allows you to select a specific PVC to assign QoS if using ADSL
WAN and multiple PVCs with your ISP. The default setting is PVC0.
5. Enter the approximated upload (Upstream) and download (Downstream) speeds in
kbps provided by your ISP.
6. Choose the QoS Mode.
• Smart-QoS (Recommended) – This mode allows for easy QoS configuration
based on simply selecting pre-defined application categories. You can manually
assign a percentage to assign for each category or using the Flexible Bandwidth
© Copyright 2013 TRENDnet. All Rights Reserved.
Management feature, the modem router can automatically determine the
traffic priority based on the selected categories to prioritize.
• User-Defined QoS – This QoS mode is recommended for advanced users only is
provided only to allow the option to provide more granular control of the
modem router QoS settings.
To configure Smart-QoS:
1. For the QoS Mode, select Smart-QoS.
2. Check the categories you would like to assign priority and enter the percentage.
OR enable Flexible Bandwidth Management and check which categories you would
like to prioritize.
3. To save changes, click Apply.
TEW-718BRM
47