Connecting To The Wnhd3004; Connecting To Your Wnhd3004 - NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre Adapter User Manual

This chapter describes how to connect to your WNHD3004 and keep its firmware up to date. You
can use the web-based GUI to manage your WNHD3004.
This chapter includes:
•

"Connecting to Your WNHD3004"

• "Using Firmware Update" on page 3-2
Connecting to Your WNHD3004
You can use a web browser to log in to a WNHD3004 and view or change its settings. To access
the web browser interface:
1. Depending on how your WNHD3004 is connected, do one of the following:
a. If the WNHD300r is connected via an Ethernet cable, open the web browser interface by
typing http://IP_address_of_the_device in the address field of your browser, and then
pressing Enter.
b. If your PC is directly connected to the WNHD3004, type either
http://www.mywifiext.net or http://www.mywifiext.net in the address field of your
browser, and then press Enter.

Connecting to the WNHD3004

v1.0, November 2010
Chapter 3
3-1