NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre Adapter User Manual page 16

3DHD Home Theater Adapter WNHD3004 User Manual
2. Within 2 minutes, activate the WPS push button feature on the other WNHD3004 units or on
your wireless client computer. For example, using the NETGEAR WNDA3100 USB Adapter,
within the 2-minute period, push the picture of this button
displays.
Figure 2-3
The WPS button on the WHD3004 blinks while the two devices are connecting and
exchanging the security key. Upon successfully connecting, the WPS LED on the WHD3004
will turn off. The settings page of the WHD3004 confirms your connection.
On a NETGEAR adapter, you will notice on its settings page that WPS sent the security key
from the access point to the USB adapter. In the future, you can add more WPS enabled
wireless devices to your network just as easily.
Repeat this step for each additional WPS push button-enabled device you add to your network.
You are done! It was just that easy to set up a secure wireless connection between the home theater
adapter and your wireless computer.
2-4
v1.0, November 2010
that the Smart Wizard
WPS button
Setting Up Your Wireless Network