Hardware Installation; Choosing The Best Location For Wireless Operation; Connecting The Device - NETGEAR JDGN1000 User Manual

Hide thumbs Also See for JDGN1000:

Table of Contents

Do not press the Reset button unless you want to clear the current settings. The

Reset button is in a small circular hole on the rear panel. If you want to restore the

default settings, please press the Reset button gently for 1 second with a fine needle

inserted into the hole and then release the button. The system reboots and returns to

the factory defaults.

The power specification is 12V, 1A. If the power adapter does not match the

specification, it may damage the device.

3.2 Hardware Installation

Many environmental factors may affect the effective wireless function of the DSL

Router. If this is the first time that you set up a wireless network device, read the

following information:

The access point can be placed on a shelf or desktop, ideally you should be able to

see the LED indicators in the front, as you may need to view them for troubleshooting.

Designed to go up to 100 meters indoors and up to 300 meters outdoors, wireless

LAN lets you access your network from anywhere you want. However, the numbers of

walls, ceilings, or other objects that the wireless signals must pass through limit signal

range. Typical ranges vary depending on types of materials and background RF

noise in your home or business.

Please follow the steps below to connect the device.

Step1

Connect the Line port of the DSL router with a telephone cable.

Step2

Connect the LAN port of the DSL router to the network card of the PC via

an Ethernet cable.

Step3

Plug one end of the power adapter to the wall outlet and connect the

other end to the Power port of the DSL Router.

The followig figure displays the connection of the DSL router, PC, and telephones.

NETGEAR JDGN1000 User Manual

Table of Contents