Access Point Mode Wps Setup - NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre Adapter User Manual

3DHD Home Theater Adapter WNHD3004 User Manual

Access Point Mode WPS Setup

These instructions will guide you through connecting the WNHD3004 to a router. Then, you will
connect wirelessly using WPS technology.
Internet
Router/gateway
Figure 2-1
1. Connect the Ethernet cable from a LAN port on your existing
router or gateway to an Ethernet port on the WNHD3004. .
2. Connect the power adapter to the unit. Verify that the power light
is on.
You are finished with setting up the access point.
2-2
WNHD3004
Access Point
v1.0, November 2010
Laptop with adapter like the NETGEAR
WNDA3100 USB Adapter
Setting Up Your Wireless Network
Power light
WPS button/
light