Setting Up Your Wireless Network; What If Some Of My Devices Don't Support Wps - NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre Adapter User Manual

This chapter describes how to easily and securely set up your home theater adapter using WPS
(Wi-Fi Protected Setup).
networks, created by the Wi-Fi Alliance and launched in January 2007. For more
information on WPS, go to
This chapter provides instructions for using the WPS push button. See
"Wireless Security" for other wireless setup and security options.
Note: Only wireless devices that support the 5GHz 802.11n or the 802.11a standards can connect
to the WNHD3004 Wireless 11N Universal Connection Adapter product. You cannot use
the WNHD3004 with 802.11b/g devices.
This chapter includes the following sections:
• "What If Some of My Devices Don't Support
• "Access Point Mode WPS Setup" on page 2-2
• "Setting Up Two WNHD3004 Units" on page 2-5

What If Some of My Devices Don't Support WPS?

Use this chart to identify the setup method you should use.
My Wireless Devices
All my wireless devices
support WPS.
Some of my devices support
WPS and some do not.

Setting Up Your Wireless Network

WPS is a standard for easy and secure setup of wireless home
http://www.wi-fi.org/wifi-protected-setup
Setup to Use
Use the WPS automated setup.
Use the WPS automated setup for
devices that support WPS. Then,
manually configure the other devices
to use the WPA security key.
v1.0, November 2010
.
WPS?"
This is the easiest and fastest way
to set up very secure wireless.
The default WPA security key can
be retrieved from the WNHD3004
AP web interface.
Chapter 2
Chapter 4,
Comment
2-1