Table of Contents
Advertisement
GS748T Software User Manual
To back up files:
1. Select Configuration Backup => backup. The Configuration Upload Page appears:
Figure 3-5
2. Select Backup to save the settings to a file. Enter the name of the target file and click start.
To restore saved settings:
From the Configuration Backup screen, enter the path to the file and select: "Restore saved setting
from file". Upon your confirmation the process is started. The browser window subsequently
closes and the switch reboots.
Factory Reset
Factory Reset restores factory defaults when you want or make a major configuration change or
need to regain management access to the switch. Use this feature under the following conditions:
•
You have lost your password
•
You are installing your switch into a different network environment for which it is simpler to
configure from the factory settings
•
You want to make a major configuration change for another reason
Restore Factory Defaults erases any prior user configuration.
To perform Factory Reset, do either of the following:
•
From the Navigation pane, navigate to Firmware > Factory Reset and click on the Factory
Reset link, or
3-8
v2.0, April 2007
Basic Web Management
Advertisement
Table of Contents
