Table of Contents
Advertisement
GS748T Software User Manual
•
IP address: 192.168.0.239
•
Subnet Mask: 255.255.255.0
From the home page thus accessed, as described in the next section, you may want to change the
network parameters to match those of your network. This is done using the "Set-up" option
selected from the navigation pane of the web interface. Your host PC network parameters must
then also be set back to match your network.
The NETGEAR Home Page and Switch Status
Having considered the preceding section, the NETGEAR home page for the GS748T Smart
Switch can be accessed from any PC with a web browser.
To start the application:
1. Open a web browser.
2. Enter the device IP address in the address bar.
3. Press Enter. The Login page appears as shown below.
Figure 3-1
3-2
v2.0, April 2007
Basic Web Management
Advertisement
Table of Contents
