Table of Contents
Advertisement
To set up RSTP:
1. From the main Navigation Pane menu, select:
→
Switch
Advanced
The following screen is displayed. with a table of port numbers that can be set as enabled or
disabled.
Figure 4-15
2. Select Enable (RSTP is disabled by default).
3. Modify the page settings if required, or accept the defaults.
4. Click Apply to save your settings.
Configuring the Switch
→
Spanning Tree; The IEEE 802.1W RSTP Setting page shown in
v2.0, April 2007
GS748T Software User Manual
4-17
Advertisement
Table of Contents
