Web Access
Clicking on the Web Access button of the Smart Wizard Discovery utility reveals the page shown
in below.
Figure 2-5
Use this page to proceed to management of the switch covered in
Management".
Additional Utilities
Alternatively, from the main page of
•
Password Change
•
Firmware Upgrade
Password Change
You can set a new password of up to 20 ASCII characters.
1. Click 'Password Change' from the Switch Setting section. The Password Change screen.
appears. You can set a new password. In this process, you are required to enter the old
password and to confirm the new one.
2. Click 'Set' to enable the new password.
Getting Started—Smart Wizard Discovery
Figure 2-1
you can access the additional functions:
v2.0, April 2007
GS748T Software User Manual
Chapter 3, "Basic Web
2-5