Onkyo TX-NR525 Owner's Manual page 55

■
Network Standby
On
Off
This setting enables or disables control over the
network.
When enabled, the NET indicator will be dimly-lit
while the AV receiver is in standby mode. Note that
the indicator may not light under certain conditions
(➔ page 20).
Note
• When set to "On", the power consumption slightly
increases in standby mode.
■
Update Notice
Enable
Disable
When this setting is enabled, you will be notified if a
firmware update via network of high importance is
available.
Note
• Selecting "Never Remind me" on the notification window
will switch this setting to "Disable" (➔ page
• For details on the update notification, see "Firmware
Update Notification" (➔ page 20).
20).
En-55
Advanced Operations
Operating
procedure
(➔ page 44)