Panel Unit Removal - Epson Stylus PHOTO 1270 Service Manual

EPSON Stylus Photo 870/1270

4.2.3 Panel Unit Removal

1. Remove HOUSING. (Refer to Section 4.2.1.)
2. Remove the harness for the Panel Unit from the frame in the printer
mechanism.
C H E C K
When installing the harness to the printer mechanism, be
P O I N T
sure to stick it along the marking line on the frame.
Marking Line
3. Remove the four screws (CBS, 3x6) securing the Panel Unit together
with HOUSING, REINFORCING, RIGHT to the printer mechanism.
4. Release the hook for the for HOUSING, REINFORCING, RIGHT from
the square cutout in the printer mechanism.
5. Release the pins fit in the printer mechanism, and then remove the
Panel Unit along with HOUSING, REINFORCING, RIGHT.
Disassembly And Assembly
Harness
Disassembly Procedures
CBS (3x6)
Panel Unit
CBS (3x6)
HOUSING,
REINFORCING, RIGHT
Figure 4-6. Panel Unit Removal
Revision B
Pins
Cutout
83