Panel Unit Removal - Epson Stylus Photo895 Service Manual

EPSON Stylus PHOTO 895/785EPX/915/825

4.3.3 Panel unit removal

1. Detach the back case (Refer to 4.3.1.)
2. Remove the control board unit. (Refer to 4.3.2)
3. Remove two screws securing the panel assembly and then remove the panel
assembly.
Screws
Figure 4-79. Panel assembly removal
4. Remove the hook from shield board and detach the shield plate and panel unit.
Figure 4-80. Panel unit removal
Disassembly and Assembly
Panel assembly
Shield plate
Hook
Panel unit
Preview monitor disassembly procedure
A D J U S T M E N T
When the panel unit is replaced, make sure to adjust as follows:
R E Q U I R E D
Brightness adjustment
Image pattern inspection
Revision B
115