Part number Black (Standard Capacity) U.S.: T007201; Canada: T007311 Color U.S.: T008201; Canada: T008311 Media Media name printer cover EPSON 360 dpi Ink Jet Paper EPSON High Quality Ink Jet Paper control EPSON Photo Quality Ink Jet panel Paper output tray...
Page 2
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
The minimum left and right margin is 0.12 inch (3.0 mm). The maximum bottom margin is 0.67 inch (17.0 mm). EPSON 4 6-inch Photo Paper is 4.5 6.9 inches (114 175 mm), including the perforated margins. The printable area is 4 6 inches (102 152 mm).
Then turn off the printer, wait a few seconds, and turn it on again. If the lights still flash, contact your dealer or EPSON. When all the lights are off, the printer is not receiving power. Try these solutions: Make sure the printer is turned on.
8.) 5. To end the check, turn off the printer after it prints the check page. Then reconnect the interface cable and turn on your printer and computer.
Ink Jet Transparencies Matte Paper - Heavyweight When you need new ink cartridges, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.
Page 7
Pull up the ink cartridge clamp all the way. The cartridge rises up from its holder. 5. Lift the cartridge out of the printer and dispose of it carefully. Keep ink cartridges out of the reach of children and do not drink the ink.
When you don’t turn on your printer for a long time, the print quality can decline. It’s a good idea to turn on your printer at least once a month to maintain good print quality.
Load paper that’s at least 8.27 inches (210 mm) wide to prevent ink from spraying inside the printer and smudging your printouts. For the best results, load EPSON ink jet paper in the printer whenever you check the print head alignment. , point to...
Follow these steps: 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer.