Print Head / Ink System Unit Removal - Epson Stylus Color C70 Service Manual

EPSON Stylus COLOR C70/C80

4.2.5 Print Head / Ink System Unit Removal

1. Remove the Printer Mechanism. (Refer to Sections 4.2.1.6.)
2. Remove the Ink Cartridges.
3. Release the CR Lock Lever.
CR Lock Lever
Figure 4-30. CR Lock Lever Releasing
4. Remove the ASF Mounting Plate. (Refer to Step 4 of Section 4.2.2.)
5. Move the Carriage Unit manually to the middle position.
If the Carriage Unit is moved to the middle position after removing
the CR Guide Plate instead of at this time, the Head will contact
the Front Paper Guide while the Carriage Unit is being moved and
this will damage the Head.
6. Remove the two screws (2)(CBS 3x6 {8±1 kgf.cm}) that are securing the CR
Guide Plate, and then remove the CR Guide Plate.
Disassembly and Assembly
Figure 4-31. CR Guide Plate Removal
When installing the CR Guide Plate, fit the two dowels into the two
holes.
7. Disengage the four Hooks, and then remove the Cable Head Holder.
Figure 4-32. Cable Head Holder Removal
Disassembly
C.B.S 3x6
Cutting parts
CR Guide Plate
Cable Head Holder
Revision A
113