EPL-5700
4.2.10 Left Cover Removal
1. Remove the right cover. (See section 4.2.2)
2. Remove paper feed roller cover. (See section 4.2.4)
3. Remove the control panel.(See section 4.2.6)
4. Remove the front cover. (See section 4.2.7)
5. Remove two CS screws(3x8) securing the left cover to the printer.
6. Lift up the left cover a little bit, and remove it to left side.
CS(3X8)
Left Cover
Figure 4-16. Left Cover Removal
Rev. A
CHECK POINT
When installing the left cover, install it so that 2
hooks of the left cover are inserted to the
corresponding holes on the printer side.
Chapter4 Disassembly and Assembly
4-12