EPL-7500
5.1 ADJUSTMENT
This chapter explains adjustment procedure. Adjustment should be done
after components and parts are exchanged.
5.1.1 Interlock Switch Position Adjustment
If the printer power does not turn on when the top cover is closed even at
the power switch on, perform the position adjustment of interlock switch by
the following procedures.
1. Remove right cover, left cover and front cover.
2. Loosen the screw which is fixing interlock switch, and close the top cover
completely.
3. Move the interlock switch up and down, and tighten the screw at the
position that the switch turns on.
Refer to Chapter4 Disassembly and Assembly.
Rev. A
Chapter5 Adjustment
5-1