Disassembly Procedure - Epson EPL-5700 Service Manual

EPL-5700

4.2 DISASSEMBLY PROCEDURE

This section explains disassembly procedure for major mechanism and unit,
which composes this printer. Refer to the flow chart. The assembly
procedures are not described, except for special notes where necessary,
because assembly can be accomplished by performing disassembly in
reverse order. Refer to the exploded diagram in the end of this book when
you need to disassemble the parts, which are not mentioned.
Rev. A
Start
Right Cover Removal
Control Panel Removal
ROM Exchange
Front Cover Removal
Left Cover Removal Interlock Switch Removal
Top Cover Removal Print Head Unit Removal
Rear Cover Removal
Fusing Unit Removal
Disassembling the Transfer Roller
Fusing Unit
Exchange
Heater Lamp Removal
Paper Eject Sensor
(PS3) Removal
Figure 4-1. Flow Chart of Disassembly
Chapter4 Disassembly and Assembly
Paper Empty Sensor(PE1)
Paper Feed Roller Removal
Removal
Main Control Board Removal
Paper Feed Roller Unit
Removal
Paper Feed Solenoid Removal
Power Board Removal
Main Motor Removal
High Voltage Paper Feed
Sensor(PS1) Removal
Board Removal
Driven Unit Removal
Thermister, Thermostat Removal
4-3