3.2.5.5
CR Motor Removal
[Step 1] Remove theprintermechanism. (Refer tosection3.2.4.)
[Step 2] Remove the tension spring and take thetifigbelt outofthe CR motor dnvepulley.
[Step 3] Remove 3 screws (CP(P2) (M3 x 10)) securing the CR motor tothe CRmotorholder plate,
and remove the CR motor.
Rev. A
Figure 3-12. CR Motor Removal
Disassembly and Assembly
CP(P2)(M3X1O)
3-13