5.11
Adjusting the stitch length
5.12 Buttons on sewing arm
HINT!
The sewing-foot pressure can only be altered when knob 3
(clamping block) is released: see the Servicing instructions.
The stitch length is adjusted in the "Seam types" menu on the Touch
Screen Monitor.
Button 5 = intermediate lock-stitches during sewing
Button 6 = needle in high or low position
Button 7 = suppresses starting or finishing lock-stitches
Button 8 = authorises thread-cutting in the monitored region
–
Press and hold down button 5.
An intermediate lock-stitch is sewn. The machine sews backwards
for as long as the button is held down.
–
Press button 6.
The needle is raised or lowered.
–
Press button 7.
The next starting or finishing lock-stitch will not be sewn.
–
Press button 8.
The thread can now be severed in the monitored region using the
pedal. This enables the material to be removed in the event of a
fault. The program issues an error message.
5
6
7
8
1
17