Duerkopp Adler 550-767 Operating Instructions Manual page 30

Selected
seam section
28
–
Select the individual seam sections by clicking on them and enter
the appropriate seam parameters.
Monitored (red)
–
When the seam parameters for all seam sections have been set,
press the "Save seam-types" field.
Inserting a seam section
–
Select a seam section in front of which a new section is to be
inserted.
–
Press the "Insert" field.
The following screen is displayed.
–
Press the "OK" field.
The screen containing the inserted seam type 1 is displayed.
1
Not monitored
(green)