Duerkopp Adler 550-767 Operating Instructions Manual page 58

56
E.g.:
·
Primary barcode:
(scanned in by manual scanner)
11112233001234567890
·
Primary-barcode identifier in the "Primary- barcode identifier A"
field (material and colour barcode):
11110000000000000000
·
ID number:
1111
If only pieces with the ID number "1111" are to be processed, this
number can be entered in the "Identifier A set value" field. If pieces
with various different ID numbers are to be processed, the "Identifier A
set value" field must remain blank.
–
The "Primary-barcode identifier B" field determines the piece type,
i.e. whether it is an upper, middle or lower piece.
E.g.:
·
Primary barcode:
(scanned in by manual scanner)
11112233001234567890
·
Primary-barcode identifier in the "Primary- barcode identifier B":
00001100000000000000
·
ID number:
22
·
The ID number must be defined in one of the "ID part 1", ID part 2"
and "ID part 3" fields. It is impossible to enter the same ID number
in more than one field.
·
Sewing parameters are set with the "Primary-barcode identifier C"
field.
E.g.:
·
Primary barcode:
(scanned in by manual scanner)
11112233001234567890
·
Primary-barcode identifier in the "Primary- barcode identifier C":
00000011000000000000
·
ID number:
33