Setting The End-Label Layouts - Duerkopp Adler 550-767 Operating Instructions Manual

6.8 Setting the end-label layout
54
The operator must have security level 2 in order to carry out changes
in the barcode labelling system.
–
Log on to the system.
–
Activate "Check" function
–
Activate "Setup" function
–
Activate "Label" function
2
3
4
–
Enter the required height of the label in the "Label length" field.
e.g.: 25 mm
–
Enter the gap between labels in the "Gap" field.
e.g.: 3 mm
–
Enter the required label texts in fields 1,
e.g.:
end-label text 1 = manufacturer
end-label text 2 = model
end-label text left = left-hand seat
end-label text right = right-hand seat
–
Set the origin for the text coordinates in fields 2.
–
Set the position of end-label text 1 in the "Pos. text 1 X" and "Pos.
text 1 Y" fields.
–
Set the position of end-label text 2 in the "Pos. text 2 X" and "Pos.
text 2 Y" fields.
–
Set the position of the barcode in the "Pos. BC X" and "Pos. BC Y"
fields.
–
The required font can be set in field 3.
–
To print the label, press button 4 prints out the label.
1
1