Duerkopp Adler 550-767 Operating Instructions Manual page 59

The ID number is used to retrieve the parameters from the database
(here: stitch type with ID number 33).
HINT
From the software version 550-767A07 onwards, 3-digit seam displays
can be generated. It should be remembered that with identifier C three
digits have to be occupied and that the 2-digit seam displays are no
longer available.
Three-digit seam displays shall be provided with a seam-display
identification between 100 and 999 (identifications between 001 and
099 are not permitted).
–
The "Prim. barcode mask L/R" field determines whether it is a right
or left-hand seat.
E.g.:
·
Primary barcode:
(scanned in by manual scanner)
11112233001234567890
·
Primary-barcode identifier in the "Primary- barcode mask L/R" field:
00000000110000000000
·
ID number:
00
–
The ID number must be defined in the "ID left" or "ID right" fields.
Example with two pieces:
11112233001234567890
"Primary -barcode identifier A":
11110000000000000000
ID number:
1111
The ID numbers are the same = OK.
11112233001234567890
"Primary -barcode identifier B":
00001100000000000000
ID number:
22
The ID numbers are different = OK.
The piece with ID number 22 is the upper layer, ID number 23 is the
lower layer.
11112233001234567890
"Primary -barcode identifier C":
00000011000000000000
ID number:
33
The ID numbers are the same = OK.
The sewing parameters no. 33 are read from the database.
11112333001234567890
11110000000000000000
1111
11112333001234567890
00001100000000000000
23
11112333001234567890
00000011000000000000
33
1
57