Ch3 And Ch4 Recording Levels; Audio Level Meter Magnification - Panasonic AGHPX255 Operating Instructions Manual

CH3 and CH4 recording levels

The setup conditions and limiter settings specified
in the menu options AUTO LEVEL CH3 and AUTO
LEVEL CH4 in the AUDIO SETUP screen change
the operation of the audio level of channels 3 and
4 as shown in the table below. These functions
cannot be manually adjusted.
Each option can be selected in the AUDIO SETUP
screen.
AUTO LEVEL
CH3 (CH4)
ON
LIMITER OFF
ON
AGC* ON
LIMITER ON
OFF
AGC OFF
* AGC: Auto Gain Control

Audio level meter magnification

Press USER button to which MAG A. LVL has been
assigned to display a magnification of the audio
level meter (available also when LEVEL METER in
the DISPLAY SETUP menu is set to OFF).
Press the button again to return to normal audio
level meter size.
Turning on the mode check (MODE CHK) during
audio level meter magnification clears the audio
level meter display. After the use of the mode check
(MODE CHK), the audio level meter reappears in
the normal size.
• "Using the USER buttons" (Page 39)
(Only for AG-HPX255P)
T C 1 2 : 3 4 : 5 6 : 2 3
F U L L P - P A U S E
P 2
1394
1 0 8 0 i
AVC-I 100
60
L T . B O X
INT L. : C H 1
-30
INT R : C H 2
2 1
LIMITER CH3 (CH4)
OFF
LIMITER OFF
AGC ON
LIMITER OFF
AGC OFF
1 2 1 9 9 9 min
1 - C L I P U S E R - 1
F B C
P 3 .2 K
0 dB
N D 1 / 1 6
-20 -12 -6 0 dB
3 4 5
(Only for AG-HPX255EN)
T C 1 2 : 3 4 : 5 6 : 2 3
F U L L P - P A U S E
P 2

1394
1 0 8 0 i
AVC-I 100
60
L T . B O X
INT L. : C H 1
-30
INT R : C H 2
2 1
1 Channel display
This displays the currently monitored audio
channel.
2 Input system display
Displays the input system for the audio channel
currently in use.
• OFF (Built-in microphone selected and
switched off)
• INT L, R (Built-in microphone selected)
• XLR1, XLR2 (INPUT 1, 2 selected)
3 Standard level bar
(Only for AG-HPX255P)
Displayed at –20 dB and –12 dB.
(Only for AG-HPX255EN)
Displayed at –18 dB and –12 dB.
4 Peak hold display
Holds the audio peak level indication for
1 second.
5 Excessive level indicator
Displayed in red when the audio level exceeds
0 dB.
1 2 1 9 9 9 min
1 - C L I P U S E R - 1
F B C
P 3 .2 K
0 dB
N D 1 / 1 6
-18 -12 -6 0 dB
3 4 5
55