Sw Mode Screen - Panasonic AGHPX255 Operating Instructions Manual

Setup menu list (continued)

SW MODE screen

Item
LOW GAIN
MID GAIN
HIGH GAIN
SUPER GAIN
ATW
HANDLE ZOOM
W.BAL.PRESET
___indicates the factory setting.
138
Sets the gain value assigned to the L position of the GAIN
switch.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
Sets the gain value assigned to the M position of the
GAIN switch.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
Sets the gain value assigned to the H position of the GAIN
switch.
0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
Configures super gain allocated to a USER button.
24dB, 30dB
BOTH:
Cycles to the next value in the order 24 dB → 30 dB →
OFF when pressed.
Allows you to assign the ATW (Auto Tracking White
Balance) function to the WHITE BAL switch. (Page 33)
Bch:
Controls the ATW function when the WHITE BAL switch is
set to B position.
OFF:
Does not assign the ATW function to the WHITE BAL
switch.
Sets the zoom speed allocated to each position of the
HANDLE ZOOM switch.
L/OFF/H:
Sets LOW/OFF/HIGH to positions 1/2/3 respectively.
(Zoom does not operate when the setting is OFF.)
L/M/H:
Sets LOW/MID/HIGH to positions 1/2/3 respectively.
L/OFF/M:
Sets LOW/OFF/MID to positions 1/2/3 respectively. (Zoom
does not operate when the setting is OFF.)
Sets the color temperature assigned to the PRST position
of the WHITE BAL switch.
3.2K, 5.6K
Setting Notes
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
• Fixed to 0 dB when the frame
rate is set to 4FRAME or lower
in VFR mode.
• A USER button to which ATW
has been assigned cannot be
used to turn ATW to OFF when
the WHITE BAL switch is set to
B position and this menu is set
to Bch.
• ATW is not available when the
frame rate is set to 4FRAME or
lower in VFR mode.