Panasonic AGHPX255 Operating Instructions Manual page 144

Setup menu list (continued)
AUDIO SETUP screen (continued)
Item
INT MIC
MIC GAIN1
MIC GAIN2
1394 AUDIO OUT Selects audio channel output to 1394 OUT in DVCPRO or
AUDIO OUT
___indicates the factory setting.
144
Determines whether or not input from the internal
microphone is used during recording.
ON:
Uses internal microphone input.
OFF:
Does not use internal microphone input.
Sets the level of an external microphone connected to the
AUDIO INPUT1 terminal.
– 40dB, – 50dB, – 60dB
Sets the level of an external microphone connected to the
AUDIO INPUT2 terminal.
– 40dB, – 50dB, – 60dB
DV mode.
CH1/CH2, CH3/CH4
Sets the audio signal output from the AUDIO OUT terminal
(pin jack), HDMI OUT terminal, headphone terminal, and
built-in speaker during P2 card playback.
CH1/CH2:
CH1 output = CH1 signals, CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals, CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals, CH2 output = CH2 signals
CH3/CH4:
CH1 output = CH3 signals, CH2 output = CH4 signals
CH3:
CH1 output = CH3 signals, CH2 output = CH3 signals
CH4:
CH1 output = CH4 signals, CH2 output = CH4 signals
Setting Notes
• Available only when SYSTEM
MODE is set to 480-59.94i or
576-50i and REC FORMAT is
set to DVCPRO or DV.