Tv/Monitor (Playback/Dubbing); Extension Control Unit (Ag-Ec4G) - Panasonic AGHPX255 Operating Instructions Manual

Connecting external units (continued)

TV/Monitor (playback/dubbing)

HDMI cable (optional)
• VIERA Link is not supported. Please be aware that when using an HDMI cable and connecting this
camera to a device that supports VIERA Link, the VIERA Link of other devices may not work in some
cases.
• From the HDMI OUT terminal, SD signals (480i, 576i) are converted to progressive signals (480P, 576P)
then output.
• Simultaneous display with the LCD monitor and the viewfinder is not possible when outputting video from
the SDI OUT terminal. For simultaneous display, set SDI OUT on the setting menu OUTPUT SEL screen
to OFF and EVF MODE on the DISPLAY SETUP screen to ON.
• Use a BNC cable (optional) with double-shield that is equivalent to 5C-FB to connect to SDI OUT
terminal.
• Please use a double-shielded HDMI cable (optional).
• It is recommended that you use a Panasonic HDMI cable.

Extension control unit (AG-EC4G)

• Some of the functions can be controlled remotely by connecting an extension control unit AG-EC4G
(optional). When AG-EC4G is connected to the REMOTE terminal of the camera recorder and the POWER
switch of the AG-EC4G is set to ON, the camera recorder enters the remote control mode automatically.
When the POWER switch is set to OFF, the camera recorder exits the remote control mode.
• For details, please refer to the AG-EC4G Operating Instructions and the "Cautions in using the Extension
Control Unit" (Page 165).
BNC cable (optional)
Monitor
104
BNC cable (optional)
Video pin cable (optional)
10-pin cable
(supplied with AG-EC4G)
VIDEO
CAM/BS
OUT
Extension control unit
AG-EC4G (optional)
Connect one of these
cables to the terminal on
the television or monitor.
TV/Monitor
Audio pin cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound