Selecting Function For The F. Audio Level Control; Ch3 And Ch4 Recording Levels - Panasonic AG-HPX500P Operating Instructions Manual

3
While checking the audio channel
level meter in the display window or
the audio level meter in the viewfinder,
adjust the AUDIO LEVEL CH1/CH2
control.
• Note that if the level exceeds the top bar
(0 dB), the word OVER illuminates to
show that the input level is excessive. The
adjustment made in such a way that the
maximum level will not reach the 0 dB bar.
F : 1
R : 2
When operating the AG-HPX500P/E without a sound
recordist, it is recommended that the F. AUDIO LEVEL
control should be used to adjust the audio level.
In advance, check the level meter in the viewfinder
screen and use the F. AUDIO LEVEL control to adjust
the appropriate audio channel so that no excessive
audio signals will be admitted.
Selecting Function for the F.
AUDIO LEVEL Control
• The F. AUDIO LEVEL control can be assigned the
function of adjusting the recording level.
• Use the menu options FRONT VR CH1 and FRONT
VR CH2 to determine whether or not to enable
control of selected input signals using the F. AUDIO
LEVEL control. Select these items from the setting
menu AUDIO SETUP screen. →For more information,
see [AUDIO SETUP screen].
AUDIO SETUP
FRONT VR CH1
FRONT VR CH2
MIC LOWCUT CH1
MIC LOWCUT CH2
MIC LOWCUT CH3
MIC LOWCUT CH4
LIMITER CH1
LIMITER CH2
PUSH MENU TO RETURN
CH3 and CH4 Recording
Levels
Set the menu options AUTO LEVEL CH3 and AUTO
LEVEL CH4 in the AUDIO SETUP screen of the
setting menu to OFF to adjust the recording level with
the AUDIO LEVEL CH3 and CH4 controls.
56
Selecting Audio Input Signals and Adjusting Recording Levels
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF