Ellipsoidal Headlight System - Vauxhall Combo Owner's Manual

172 Self-help
Picture no: 15211s.tif

Ellipsoidal headlight system

Dipped beam
Headlight system with separate bulbs for
dipped beam (inner bulbs) and main beam
(outer bulbs).
1. Open bonnet and engage support.
2. When replacing bulbs on the left-hand
side, open the cover of the fusebox.
When replacing bulbs on the right-hand
side, detach the air hose from the air
filter.
3. Remove the headlight protective cover
by pressing the catch and pulling the
cover downward and off.
Picture no: 15212s.tif
4. Detach plug connector from bulb.
5. Disengage the spring wire clip from the
lugs and swivel it aside.
6. Remove bulb from reflector housing.
7. When fitting a new bulb, engage the
lugs in the recesses on the reflector
without touching the glass.
8. Engage spring wire clip, plug connector
onto bulb.
9. Place headlight protective cover in
position and close.
10. After replacing bulbs on the left-hand
side, close the cover of the fusebox.
After replacing bulbs on the right-hand
side, reattach the air hose to the air
filter and engage.