Vauxhall Combo Owner's Manual page 163

158 Self-help
Picture no: 15319t.tif
4. Screw the compressor air hose to the
connection on the sealant bottle.
5. Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the tyre in such
a way that the sealant bottle is upright.
6. Remove the valve cap from the defective
tyre.
Picture no: 15795t.tif
7. Screw the filler hose to the tyre valve.
8. The switch on the compressor must be
set to §.
9. Plug the compressor connector into the
accessory socket or the cigarette lighter
socket 3. Accessory socket –
see page 71.
Picture no: 15796t.tif
10. Switch on ignition.
11. Set the rocker switch on the compressor
to I. The tyre is filled with sealant.
12. While the sealant bottle drains (approx.
30 seconds) the pressure indicator on
the compressor briefly points to 6 bar.
Pressure then sinks again.
13. All of the sealant is pumped into the
tyre. Afterwards, the tyre is filled with
air.
14. The prescribed tyre pressure
(see pages 205, 206) should be
reached within 10 minutes. Switch off
the compressor when the correct
pressure is obtained.