Vauxhall Combo Owner's Manual page 121

116 Easytronic
Picture no: 13739s.tif
If the cause of the interruption to the power
supply is not the discharged battery,
consult a workshop. We recommend your
Vauxhall Authorised Repairer. If the vehicle
has to be removed from moving traffic,
release clutch as follows:
1. Apply handbrake and switch off ignition.
2. Open bonnet and engage support.
3. Clean Easytronic around the cap
(see figure) so that no dirt can get into
the opening when the cap is removed.
4. Rotate cap to slacken and remove by
lifting upwards – see figure.
5. Turn the adjusting screw clockwise using
a flat-head screwdriver (vehicle tools 3 –
see page 151) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resistance, since
this can damage the Easytronic.
6. Fit cleaned cap again. The cap must be
in full contact with the housing.
Towing the vehicle and starting the engine
is not permitted when the clutch has been
released in this way, although the vehicle
can be moved a short distance.
Consult a workshop immediately.
We recommend your Vauxhall Authorised
Repairer.