Radio Operation; Manual Tuning; Automatic Seek Tuning - Alpine CDA-7892E Owner's Manual

Radio Operation

TUNE/A.ME
SOURCE
f UP
g DN

Manual Tuning

1
Press the SOURCE button until a radio frequency
appears in the display.
2
Press the BAND button repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → AM
3
Press the TUNE button repeatedly until "DX SEEK" and
"SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
downward or upward one step respectively until the
desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo FM
station is tuned in.
16
-EN
BAND
Preset buttons (1 through 6)

Automatic Seek Tuning

1
Press the SOURCE button until a radio frequency
appears in the display.
2
Press the BAND button repeatedly until the desired
radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → AM
3
Press the TUNE button to illuminate the DX and SEEK
indicators in the display.
With the DX (Distance) mode activated, both strong
and weak stations will be tuned in the Auto-Seek
operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will be
tuned.
4
Press the g DN or f UP button to automatically
seek for a station downward or upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next station.