Turning Mute Mode On/Off; Scroll Setting; Setting The Aux Mode (V-Link) - Alpine CDA-7892E Owner's Manual

Turning Mute Mode On/Off

If a device having the interrupt feature is connected,
audio will be automatically muted whenever the interrupt
signal is received from the device. This function can be
turned ON or OFF from the head unit by following
procedure below.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select the
MUTE mode.
3
Press the BAND button to turn on or off the MUTE
mode.
Each press toggles between the MUTE ON and OFF
modes.
NOTE
The initial setting at the factory is "MUTE ON."
4
Press the SETUP button again to return to normal
operation.

Scroll Setting

This CD player allows to scroll the disc and track name
recorded on CD-Text discs if the CD changer compatible
with CD-Text is connected. The folders names, files
names and ID3 TAG can also be scrolled while playing
MP3 when the CD changer compatible with MP3 is
connected. This feature will not work for the disc titles
that were input manually.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select
"SCR"(SCROLL).
3
Press the BAND button to toggle mode between SCR
AUTO and MANU.
• SCR AUTO: the display of CD text is scrolled
continuously.
• SCR MANU: the display is scrolled only once when a
disc is loaded or when a track is changed, etc.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
NOTES
• Initial mode is "SCR MANU."
• The unit scrolls only CD text names. The disc titles input
manually (refer to page 11) cannot be scrolled.

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an optional
Ai-NET/RCA Interface cable (KCA-121B) or Versatile
Link Terminal (KCA-410C) to this component.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select "AUX."
3
Press the BAND button to toggle the mode between
AUX ON and AUX OFF.
NOTES
• The initial setting at the factory is AUX OFF.
• You can set the AUX mode display by pressing the
g DN or f UP button after AUX ON is set, select the
AUX mode display setting, and then press the BAND button.
• When connecting the KCA-410C, you can set two AUX mode
displays.
4
Press the SETUP button to return to normal mode.
5
To adjust the volume, etc., first press the SOURCE
button and select the AUX mode, then make the
necessary adjustment.
NOTE
When using the Versatile Link Terminal (KCA-410C), you can
connect two external inputs. To select the mode, press the BAND
button on the unit.
13
-EN