Controlling Cd Changer (Optional); Multi-Changer Selection - Alpine CDA-7892E Owner's Manual

CD Player Operation
BAND
SOURCE
F

Controlling CD Changer (Optional)

An optional 6-disc or 12-disc CD Changer may be
connected to the CDA-7892E if it is Ai-NET compatible.
With a CD Changer connected to the Ai-NET input of
the CDA-7892E, the CD Changer will be controllable
from the CDA-7892E.
Using the KCA-400C (Multi-Changer Switching device) or
the KCA-410C (Versatile Link Terminal) multiple
changers can be controlled by the CDA-7892E.
See the Multi-Changer Selection section on this page for
selecting the CD Changers.
NOTES
• The controls on the CDA-7892E for CD Changer operation are
operative only when a CD Changer is connected.
• The "Changer" indicator illuminates when a CD Changer is
connected.
• The DVD changer (optional) is controllable from the CDA-
7892E as well as the CD changer.
1
Press the SOURCE button to activate the CHANGER
mode. The display shows the disc number and track
number.
NOTE
The source indicator varies depending on the connected source.
2
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer. The selected disc number appears in the
display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the same
way as for the CDA-7892E CD player.
For details, please see the CD Operation section.
• If the "FUNC" indicator is illuminated the Disc Select buttons
become nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is
the same as for the 6-disc CD Changer. To select discs
numbered from 7 to 12, first press the "F" button. This
changes the "D" indicator to "d." Then press the desired
Preset button. With the "F" button activated, the Preset
buttons 1 to 6 will represent discs 7 to 12 respectively.
20
-EN
Disc Select buttons
(1 through 6)

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers, the
KCA-400C (Multi-Changer Switching device) must be
used. If you use 1 Switching device, you can connect up
to 4 CD Changers. If you use 2 Switching devices, you
can connect up to 6 CD Changers. When using KCA-
410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).
1
Press the SOURCE button to activate the CD Changer
mode.
2
Press the BAND button to activate the CD Changer
Selection mode.
3
The CD Changer Selection mode remains active for 8
seconds after step 2 is performed. Press the BAND
button until the desired CD Changer indicator appears
on the display.
NOTE
If the selected CD Changer is not connected, the display will
show "NO CHGR ."
4
To operate the selected changer, see "CD Player
Operation" section.
NOTE
For further details about the external input (AUX) when using
KCA-410C, see "Setting the AUX Mode (V-Link)" on page 13.