CD player Operation (IVA-C801 only)
(CVA-1006.....optional)
(IVA-C801)
1
2
3 4 5 6
c
Playback
Only IVA-C801 has a built-in CD player.
When an optional Alpine CD player or CD changer is
connected, you can control it from the head unit. This
section describes operation assuming that an Alpine
CD player/Changer is connected to the IVA-C801/
CVA-1006.
(When a CD changer is connected, see page 17 to
select your desired disc.)
IVA-C801
built-in CD
Slave CD player
Option
CD Changer
Option
1
Press the SOURCE button to display the main
menu screen.
2
Rotate the rotary encoder and select the CD
player mode. Then, press the rotary encoder to
execute the selection.
The display shows the CD player mode screen.
When a CD is inserted into the CD SLOT of the
IVA-C801, with the label side facing up, the unit
starts to play the CD.
CVA-1006:
When an optional Alpine CD player is connected,
inserting an CD into the optional CD player starts
playback automatically.
3
To temporarily pause playing, press the 2 (:/J)
button.
To resume play, press the 2 (:/J) button for a
second time.
4
Press the eject (c) button when you want to
eject the CD. (If you use an optional CD player,
press the eject button on the optional CD player.)
14
-EN
SOURCE
Rotary encoder
CVA-1006
×
\
Option
Option
(CVA-1006)
1
2
3 4 5 6
NOTES (IVA-C801 only)
• Three-inch (8 cm) CD's can be used.
• Only compact discs containing the mark shown can be
used.
• We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
• Be sure to turn the ignition key to the ACC or ON
position before inserting an CD. Otherwise it may
cause damage to the player.
Fast Forward and Backward
1
Press and hold the 3 (f) or 1 (g) button
to quickly move forward or backward respectively
to reach the desired music section on the disc.
Release the button when the desired section is
reached.
SOURCE
Rotary encoder