Setting Dhe Power Or Fine Mode; Selecting Bbe Mode - Alpine CVA-1006 Owner's Manual

Audio Processor Operation (Optional)
(IVA-C801)
Function buttons
(2 through 6)
1

Setting DHE Power or Fine Mode

The DHE Power and Fine modes enhance the
DHE effects. Power makes coarse adjustments to
the overall balance whereas Fine will make more
subtle changes. Listen to how each mode affects
the music and select the one most pleasing to
your taste.
1
Activate the DHE mode, then press one of the
Function buttons 2 (MODE1) through 6
(MODE5) that has the desired DHE mode to be
adjusted.
2
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The DHE adjustment mode is activated.
3
Press the rotary encoder to select the desired
mode either DHE Power or DHE Fine mode,
then rotate the rotary encoder to select the ON
or OFF mode. Each press toggles between the
Power/Fine on and off modes.
When it is set to the ON mode, the DHE effects
will be enhanced.
Effect of the Power On mode:
• More powerful bass sound and crisp, clear
sound will be produced.
Effect of the Fine On mode:
• Vocal/chorus music will be refined and
becomes clearer.
30
-EN
4
FUNC
SOURCE Rotary encoder
(CVA-1006)
Function buttons
(2 through 6)
1 4

Selecting BBE Mode

The BBE (Barcus Berry Electronics) Surround
Processor is designed to return the natural
balance of harmonic time alignment, which
disappears when the sound signal is amplified
and reproduced by loudspeakers. The result of
this processing is crisp, clean sound with tighter
transients and sharper imaging. If you make the
BBE adjustments after adjusting the surround
settings, the audible processing result will be
enhanced remarkably.
1
Press the SOURCE button.
The main menu screen appears in the display.
2
Press the 4 (A.PROC) button. The Audio
Processor List screen is displayed.
3
Rotate the rotary encoder and select "BBE" from
the list displayed. Press the rotary encoder to
execute the selection.
The display changes to the BBE mode screen.
4
Select a desired BBE mode and press the
corresponding Function button, 2 (MODE1)
through 4 (MODE3). The effect is proportionally
reduced for the BBE-2 and BBE-3 has the least
effect.
To deactivate the BBE mode, press the 1 (OFF)
button.
5
When the setting has been completed, press the
FUNC (RETURN) button.
Tip
When the FUNC (RETURN) button is pressed, the
display returns to the previous screen.
FUNC
SOURCE
Rotary encoder